The externally driven screw stepper motor can withstand large loads, thanks to the structural strength of the screw and the torque output of the motor itself.
Screw motion is a rolling contact, with minimal wear and a long lifespan.
Features:
-
Ten-year warranty for confident purchases
-
Hybrid stepper construction
-
Available in single or double shaft versions
-
We provide tailored services and are open to contract manufacturing. Seeking distributors! !
-
Welcome contract manufacturing projects
Motor Specifications
| Step Angel | 1.8 ° |
| Fram Size | 35 mm |
| Number of Phase | 2 Phase |
| Rated Current | 1.5Amp |
| Holding Torque | 360 mN.m |
| Resistance | 3.2 ohm |
| Inductance | 4.5 mH |
| Rotor Inertia | 57g-cm² |
| Motor weight | 0.24kg |
| Lead Screw | Tr5X2 |
| Connection | Bipolar |
Operating Specifications
Step Angle: 1.8°
Maximum Temperature :80°C maximum
Ambient Temperature: -20 °C to 50°C
Storage Temperature -20: °C to 100°C
Humidity Range (%) :85% or less, non-condensing
Magnet Wire Insulation :Class B 130 deg C
Insulation Resistance :100M Ohm at 500 VDC
Dielectric Strength :500 VDC for 1 min
Shaft Radial Play:0.02Max. (450g-load)
Shaft Axial Play:0.08Max. (450g-load)
Max. radial force:28N (20mm from the flange)
Max. axial force):10N
Torque Curves
Download
If our standard motor cannot meet your needs,
we can customize the motor according to your needs
Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.
Options:
Encoder | Brake | Gearbox | Shaft
Please click the "Get a quote" button below to tell us your requirements.
|
|
1.8 Degree 2 Phase Nema 14 Tr5*2 Linear Stepper Motor 35*35*42mm 0.36N.m Images
|
